11
(617417440)
FM226A 10/18
Access 800
™
TCAC2 Series
Locks
Keypad Programming Instructions
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
5
M801, M803, M804, M806 Programming
Enter a Lock Out User Code
99# Master Code* or Supervisor Code* Yellow LED blinks
50# 3# (User Location 03-2000)#
Yellow LED blinks
User Code*
Yellow LED blinks quickly
User Code*
Yellow LED blinks slowly
*
Yellow LED goes out
Note: The “lock out” user is location dependent and will lock out all users beyond this
location. To ensure that all users are locked out of the keypad, program this user at
User Location “03”.
Enter A One Time User Code
99# Master Code* or Supervisor Code* Yellow LED blinks
50# 5# (User Location 03-2000)#
Yellow LED blinks
(1-6 Digits)*
Yellow LED blinks quickly
(1-6 Digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter An Extended Unlock User Code
99# Master Code*
Yellow LED blinks
50# 4# (User Location 03-2000)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
To Activate The RF FOB Function
Note: Press and hold for 3 seconds the button on the RF FOB. If the controller
beeps and the LEDs flash, the RF FOB function is already enabled and this
procedure does not have to be completed. With the RF FOB function enabled
the battery life of the unit will be reduced.
Press the white reset button located in
the battery compartment and any front
keypad key at the same time and hold
for 1 second, then release buttons.
Yellow LED blinks
Enter code 1030#
Yellow LED blinks
1#
Yellow LED blinks
1# (to Enable) or 0# (to Disable)
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
