ML20700 PWI/PIP Series Mortise Lock
8
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Fig. 4a
5) Installation Instructions (Continued)
4. Install Lock Body:
a. Feed wires into mortise pocket and through hole on inside face of door while installing
lock body (Fig. 4a).
b. Pull wires through hole while inserting lockbody (Fig. 4a).
DO NOT push wires back into cylinder hole.
IMPORTANT
: Door must remain open during installation. Use door stop.
c. Install, but do not tighten two #12 x 1” combination screws through lock body (Fig. 4b).
(2) #12 Combination Screws
Inside Face of Door
Fig. 4b
