ASSA 179B
Emergency exit device
Warning!
The safety features of this product are essential to its compliance with EN 179:2008.
No modification of any kind, other than those described in these instructions, are
permitted. ASSA takes no responsibility for products not mounted as described in
these instructions or if enclosed maintenance and operating instruction not are
followed.
Strike plate
ASSA 179B must be installed together with a by ASSA recommended strike plate or
electric strike. See information under emergency exit device 179B at www.assa.se.
Accessories
ASSA 179B can be installed together with in- and outside round or oval cylinder with
Scandinavian shape.
This mounting instruction is intended for installation of
emergency exit device ASSA 179B
and
179B-2
in combination with ASSA lock case model
711-50/70
or
732-50/70
.
!
MOUNTING INSTRUCTION
ASSA AB 702013
Edition 4
1/6
Classification according to EN 179:2008
3
6
6
B*
1
3
5
2
A
A*
1
2
3
4
5
6
7
8
9
10
1.
(3) is suitable for use in high frequency applications;
2.
(6) tested to 100 000 cycles;
3.
(6) for a door mass of up to 200 kg
, door width ≤1320 mm, door height ≤2520 mm;
4.
(B*) suitable for use on fire/smoke resisting door assemblies.
*When using lock case 711-50/70 in addition with other product that keeps the door closed in case of
fire;
5.
(1) is safe for use on escape route doors;
6.
(3) with high corrosion resistance;
7.
(5) with a grade 5 security level 5 000 N;
8.
(2) with a projection of up to 100 mm;
9.
(A) operated with lever handle type A;
10.
(A*) suitable for use on a single door and double door active leaf only with lock case 732-50/70;
*suitable for use on a single door only with lock case 711-50/70.
