IMPORTANT: PLEASE READ BEFORE ATTEMPTING TO
INSTALL MAGNETIC LOCK
A. Handle the equipment with care, damaging the mating
surface of the magnet or armature plate may reduce locking
efficiency.
B. The magnet mounts rigidly to the door frame. The armature
plate mounts to the door with hardware. The kit provided
allows the armature to pivot about its center to compensate
for door wear and misalignment.
C. Template use must take place with the door
in its normally closed position.
D. Firmly tighten all screws.
A
B
C
D
E
F
G
H
8.0
1.75
2.9
.81
1.0
.4
.5
.7
MAGNET DIMENSIONS (INCHES)
A
B
C
D
E
F
G
H
203.2 44.45 73.66 20.57 25.4 10.16 12.7 19.05
MAGNET DIMENSIONS (MM)
BLIND NUT
HEADER
DOOR
HEAD
3/8" (US) OR 9.5MM
(METRIC) HOLE
B
G
H
F
CABLE
D
E
A
C
TAMPER
CAP
GOLD
WASHER
SOCKET CAP SCREW
1/4-20 X 3"
(US VERSION)
6MM-1MM X 75MM
(METRIC VERSION)
Fig. 2 ARMATURE DIMENSIONS AND ASSEMBLY
Important: Armature plate must be able to float
freely. Do not over tighten. The armature
plate will automatically adjust to the
proper position with the magnet.
Fig. 1 STANDARD MAGNET DIMENSIONS
AND ASSEMBLY
A
B
C
D
E
F
F
A
B
C
D
E
F
6.0
2.75
.5
1.37
3
2.25
152.4
69.9
12.7
34.8
76.2
57.2
ARMATURE DIMENSIONS
(IN.)
(MM)
INSTALLATION INSTRUCTIONS
1584 - 1587 Series Electromagnetic Locks
FOR ASSISTANCE CONTACT SARGENT AT 800-810-WIRE (9473) or www.sargentlock.com
1
A7361A
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
