2 7
3.10 Hardware Monitor Setup
You may select “Hardware Monitor Setup” to check the status of the hardware
on your system. It allows you to monitor the parameters for CPU temperature,
Motherboard temperature, CPU fan speed, and critical voltage.
3.11 Change Supervisor Password / Change User Password
These two options allow you to specify the supervisor / user password.
Valid password can be a 1 to 6 alphanumeric characters combination.
3.12 Auto Configuration with Optimal Settings
When you select this option, it will pop up a dialog box that lets you install
optimized defaults for all appropriate items in the BIOS Setup Utility. Press
<Enter> to install the default values. The optimized default setting place
demands on the system that may be greater than the performance level of
the components, such as the CPU and the memory. It may cause fatal errors
or instability if you install the optimized defaults when your hardware does
not support them.
3.13 Save Settings and Exit
Select this item and press <Enter> to save the changes that you have made
and exit the BIOS Setup Utility.
3.14 Exit Without Saving
Select this item and press <Enter> to exit the BIOS Setup Utility without saving
any changes.
AMIBIOS SETUP UTILITY - VERSION 3.31a
CPU Temperature
M / B
CPU FAN Speed
Chassis
Vcore
+ 3.30V
+ 5.00V
Temperature
Fan Speed
+ 12.00V
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Hardware Monitor Setup
35 C
27 C
3110 RPM
0 RPM
1.72V
3.31V
4.97V
12.16V
