background image

36

Chapter 4: Software Support 

4.1  Install Operating System 

This motherboard supports Microsoft

®

 Windows

®

 operating systems: 10 64-bit. Be-

cause motherboard settings and hardware options vary, use the setup procedures 
in this chapter for general reference only. Refer to your OS documentation for more 
information.

4.2  Support CD Information

The  Support  CD  that  came  with  the  motherboard  contains  necessary  drivers  and 
useful utilities that enhance the motherboard’s features.

4.2.1  Running The Support CD 

To begin using the support CD, insert the CD into your CD-ROM drive. The 
CD automatically displays the Main Menu if “AUTORUN” is enabled in your 
computer. If  the Main Menu did not appear automatically, locate and double 

click on the file “ASRSETUP.EXE” from the BIN folder in the Support CD to 

display the menus.

4.2.2  Drivers Menu

The Drivers Menu shows the available device’s drivers if the system detects 
installed devices. Please install the necessary drivers to activate the devices.
 

4.2.3  Utilities Menu

The Utilities Menu shows the application software that the motherboard sup-

ports. Click on a specific item then follow the installation wizard to install it.

4.2.4  Contact Information

If you need to contact ASRock or want to know more about ASRock, you’re 
welcome to visit ASRock’s website at http://www.asrock.com; or you may con-
tact your dealer for further information.

Содержание SBC-230-WT





































Отзывы: