manualshive.com logo in svg

ASROCK Rack MT-C224, Руководство пользователя

Поделиться
Скачать
ASROCK Rack MT-C224 Скачать руководство пользователя страница 23

18

19

English

2.6  Expansion Slots (PCI and PCI Express Slots)

There is one PCI Express slot on this motherboard.

PCIE slot: 

 

PCIE1 (PCIE 3.0 x8 slot) is used for PCI Express x8 lane width graphics cards.  
 

Slot

Generation

Mechnical

Eletrical

Source

PCIE 1

3.0

x8

x8

Intel C224 chipset

 

Installing an expansion card

Step 1. 

Before installing an expansion card, please make sure that the power supply

 

 is switched off or the power cord is unplugged. Please read the documentation

 

 of the expansion card and make necessary hardware settings for the card 

 

 before you start the installation.

Step 2. 

Remove the system unit cover (if your motherboard is already installed in a 

 chassis).
Step 3. 

Remove the bracket facing the slot that you intend to use. Keep the screws for 

 

later use.

Step 4. 

Align the card connector with the slot and press firmly until the card is 

 

completely seated on the slot.

Step 5. 

Fasten the card to the chassis with screws.

Step 6.   Replace the system cover.

Содержание Rack MT-C224


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды