ASROCK P67 PRO3 - Скачать руководство пользователя страница 53

Страница: 53 / 64

South Bridge Confi guration

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/power loss.

If [Power Off] is selected, the AC/power remains off when the power

recovers. If [Power On] is selected, the AC/power resumes and the

system starts to boot up when the power recovers.

Deep Sx

Mobile platforms support Deep S4/S5 in DC only and desktop platforms

support Deep S4/S5 in AC only. Confi guration options: [Disabled], [Enabled

in S5] and [S4 and S5]. The default value is [Disabled].

Audio Confi guration

Onboard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If

you select [Auto], the onboard HD Audio will be disabled when PCI Sound

Card is plugged.

Front Panel

Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.

ACPI HPET Table

Use this item to enable or disable ACPI HPET Table. The default value is

[Enabled]. Please set this option to [Enabled] if you plan to use this

motherboard to submit Windows

Vista

certifi cation.

Onboard LAN

This allows you to enable or disable the “Onboard LAN” feature.

PCI Legacy Mode

This allows you to enable or disable PCI legacy mode. The default value is

[Enabled].

Voltage Droop Adjust

This allows you to adjust voltage droop. The default value is [Disabled].

Содержание P67 PRO3 -
































































Результаты поиска

Содержание P67 PRO3 -

Отзывы:

Похожие инструкции для P67 PRO3 -

Бренды по названию

Популярные бренды

ASROCK P67 PRO3 -, Руководство пользователя

Результаты поиска

Содержание P67 PRO3 -

Отзывы:

Похожие инструкции для P67 PRO3 -

Бренды по названию

Популярные бренды