background image

1 9

2.7 Serial ATA (SATA) Hard Disks Installation

This motherboard adopts SiS 964 southbridge chipset that supports Serial

ATA (SATA) hard disks and RAID functions. You may install SATA hard disks

on this motherboard for internal storage devices. This section will guide you

to install the SATA hard disks.

STEP 1: Install the SATA hard disks into the drive bays of your chassis.

STEP 2: Connect one end of the SATA data cable to the motherboard’s

primary SATA connector (SATA1).

STEP 3: Connect the other end of the SATA data cable to the primary SATA

hard disk.

STEP 4: Connect the SATA power cable to the SATA hard disk. If you just want

to install only one SATA HDD, the installation process is complete at

this step. If you want to install two SATA HDDs or you want to use

RAID function, please continue to do the following steps.

STEP 5: Connect one end of the second SATA data cable to the

motherboard’s secondary SATA connector (SATA2).

STEP 6: Connect the other end of the SATA data cable to the secondary SATA

hard disk.

STEP 7: Connect the SATA power cable to the SATA hard disk.

2.8 Hot Plug and Hot Swap Functions for SATA HDDs

motherboard supports Hot Plug function for SATA Devices. Usually,

each power wire will provide 2 power connectors for HDDs. We suggest you

to connect SATA HDDs to different power wires to prevent intervention.

As to Hot Swap support, please refer to the updates of later version driver that

supports Hot Swap function on our website www.asrock.com

NOTE

What is Hot Plug Function?

If the SATA HDDs are NOT set for RAID configuration, it is called “Hot

Plug” for the action to insert and remove the SATA HDDs while the system

is still power-on and in working condition.

However, please note that it cannot perform Hot Plug if the OS has been

installed into the SATA HDD.

What is Hot Swap Function?

If SATA HDDs are built as RAID1 then it is called “Hot Swap” for the action

to insert and remove the SATA HDDs while the system is still power-on

and in working condition.

This Manual: http://www.manuallib.com/file/2446253

Содержание P4S55FX




































Отзывы: