ASROCK IMB-158 Скачать руководство пользователя страница 27

Страница: 27 / 40

Intel SpeedStep Technology

Intel SpeedStep technology is Intel’s new power saving technology. Pro-
cessors can switch between multiple frequencies and voltage points to en-

able power saving. The default value is [Enabled]. Configuration options:

[Enabled] and [Disabled]. If you install Windows

OS and want to enable

this function, please set this item to [Enabled]. This item will be hidden if
the current CPU does not support Intel SpeedStep technology.

3.3.1 CPU Configuration

Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issues with some power supplies. Please set this item to

[Disabled] if above issues occur.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to
keep C3, C6 and C7 all enabled for better power saving.

Intel Turbo Boost Technology

Use this item to enable or disable Intel Turbo Boost Mode Technology.
Turbo Boost Mode allows processor cores to run faster than marked fre-

quency in specific conditions. The default value is [Enabled].

VT-d

Use this to enable or disable Intel

VT-d technology (Intel

Virtualization

Technology for Directed I/O). The default value of this feature is [Disabled].

Содержание IMB-158








































Результаты поиска

Содержание IMB-158

Отзывы:

Похожие инструкции для IMB-158

Бренды по названию

Популярные бренды

ASROCK IMB-158, Руководство пользователя

Результаты поиска

Содержание IMB-158

Отзывы:

Похожие инструкции для IMB-158

Бренды по названию

Популярные бренды