15
Backlight Power Select
Use this to set up the backlight
(LCD_BLT_VCC)
power of the LVDS connector
(5-pin BKT_PWR1)
and the panel backlight power
(see p.8 No. 14)
of BLT_PWM1.
1-2: LCD_BLT_VCC: +5V
2-3: LCD_BLT_VCC: +12V
4-5: LCD_BLT_VCC: DC Input
Backlight Control Level (CON_LBKLT_CTL)
1-2: From eDP PWM to CON_LBKLT_CTL
(3-pin BLT_PWM1)
2-3: From LVDS PWM to CON_LBKLT_CTL
(see p.8, No. 10)
COM Port PWR Setting Jumpers
1-2: +5V
(3-pin PWR_COM3, for COM Port3)
2-3: +12V
(3-pin PWR_COM4, for COM Port4)
(3-pin PWR_COM5, for COM Port5)
(see p.8, No. 1)
(3-pin PWR_COM1, for COM Port1)
1-2: +5V
(3-pin PWR_COM2, for COM Port2)
2-3: +12V
(3-pin PWR_COM6, for COM Port6)
(see p.8, No. 21)
USB Power Setting Jumpers
(3-pin USBH_PWR1, for USBH_0_1)
1-2: +5V
(3-pin USB_PWR2, for USB2_0_1)
2-3: +5VSB
(see p.8, No. 31)
(3-pin USB_PWR1, for USB3_0_1)
1-2: +5V
(3-pin USB3_PWR1, for USB3_2_3)
2-3: +5VSB
(see p.8, No. 37)
Panel Power Select (LCD_VCC)
Use this to set up the VDD
(5-pin PNL_PWR1)
power of the LVDS connector.
(see p.8 No. 16)
1-2: LVDD_VCC: +3V
2-3: LVDD_VCC: +5V
4-5: LVDD_VCC: +12V
