3 7
3 7
3 7
3 7
3 7
DRAM tFAW
This controls the number of DRAM clocks for TFAW. Configuration options:
[Auto], [1] to [63].
DRAM Command Rate
Use this item to adjust DRAM Command Rate. Configuration
options : [1], [2] and [Auto].
ASRock VDroop Control
Use this to enable or disable ASRock VDroop control. Configuration options:
[With VDroop] and [Without VDroop]. The default value is [With VDroop].
CPU Voltage
Use this to select CPU Voltage. Configuration options: [Auto], [Manual] and
[Overdrive Offset]. The default value is [Auto].
DRAM Voltage
Use this to select DRAM Voltage. Configuration options: [Auto], [1.30V] to
[2.05V]. The default value is [Auto].
VTT Voltage
Use this to select VTT Voltage. Configuration options: [Auto], [1.11V] to
[1.55V]. The default value is [Auto].
PCH Voltage
Use this to select PCH Voltage. Configuration options: [Auto], [1.05V],
[1.15V] and [1.25V]. The default value is [Auto].
CPU PLL Voltage
Use this to select CPU PLL Voltage. Configuration options: [Auto], [1.81V],
[1.94V], [2.06V] and [2.18V]. The default value is [Auto].
GFX Voltage
Use this to select GFX Voltage. Configuration options: [Auto],
[+0 mV] to [+300 mV]. The default value is [Auto].
IGD VID
Use this to select onboard VGA VID. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.
