ASROCK G43TWINS-FULLHD, Руководство пользователя

Страница: 9 / 208

9 99 99
ASRock G43TwinsFullHD Motherboard
EnglishEnglishEnglishEnglishEnglish
8. Full HD 1080p Blu-ray (BD) / HD-DVD playback is supported only when you
install ASRock DVI_DisplayPort Card. Full HD 1080p Blu-ray (BD) / HD-DVD
playback support requires the proper hardware configuration. Please refer to
page11 for the minimum hardware requirement and the passed Full HD 1080p
Blu-ray (BD) / HD-DVD films in our lab test.
9. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 3 for
proper connection.
10. Before installing SATAII hard disk to SATAII connector, please read the
“SATAII Hard Disk Setup Guide” on page 30 of “User Manual” in the support
CD to adjust your SATAII hard disk drive to SATAII mode. You can also
connect SATA hard disk to SATAII connector directly.
11. Power Management for USB 2.0 works fine under Microsoft
®
Windows
®
Vista TM 64-bit / Vista TM / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
12. WiFi/E header supports WiFi+AP function with ASRock WiFi-802.11g or
WiFi-802.11n module, an easy-to-use wireless local area network (WLAN)
adapter. It allows you to create a wireless environment and enjoy the
convenience of wireless network connectivity. Please visit our website for
the availability of ASRock WiFi-802.11g or WiFi-802.11n
module. ASRock website http://www.asrock.com
13. It is a user-friendly ASRock overclocking tool which allows you to surveil
your system by hardware monitor function and overclock your hardware
devices to get the best system performance under Windows
®
environment.
Please visit our website for the operation procedures of ASRock OC
Tuner. ASRock website: http://www.asrock.com
14. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
15. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
16. AHCI function is not supported under Windows ® 2000 OS. It is recom-
mended to use IDE mode under Windows ® 2000. Please refer to page 47 of
“User Manual” in the support CD for detailed setup.