ASROCK EPC621D8A, Руководство пользователя

Страница: 39 / 92

EPC621D8A
32 33
English
NUT1 NUT2 NUT3 NUT4
Step 3
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location D by default. Skip Step 3 and
4 and go straight to Step
5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
NUT1 NUT2 NUT3 NUT4
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
NUT1 NUT2
NUT1 NUT2 NUT3 NUT4
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
NUT1 NUT2 NUT3 NUT4
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.