3 5
3 5
3 5
3 5
3 5
DRAM Voltage
Use this to select DRAM voltage. Configuration options are [Auto], [Low],
[Normal], [High], and [Ultra High]. The default value is [Auto].
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers.
V-Link Speed
Use this to select the speed of V-Link Bus. Configuration options are
[Normal], [Fast]. The default value is [Normal].
PCI Delay Transaction
Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is
accessing 8-bit ISA cards. Disable this feature when using ISA cards that
are not PCI 2.1 compliant.
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Settings
Primary Graphics Adapter
V-Link Speed
PCI Delay Transaction
IDE Drive Strength
OnBoard LAN
OnBoard HD Audio
Front Panel Control
HT Link Speed
HT Link Width
[PCI]
[Auto]
[Auto]
[Normal]
[Disabled]
[Normal]
[Enabled]
[Auto]
[Auto]
Select Screen
Select Item
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
F9
Load Defaults
To set DRAM Voltage.
Advanced
DRAM Voltage
[Auto]
Burst Length
Burst length can be set to 8 or 4 beats.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
Memory Hole
Use this to enable or disable memory hole. The default value is [Disabled].
DDRII Initialization Mode
Configuration options: [Auto] and [Compatible]. The default value is [Auto].
AddrCmdFineDelay Offset
This item is set to [Auto] by default. You may adjust the value of Address/
Command Fine Delay for memory. Configuration options: [Auto], [0], [5].
3.3.2
3.3.2
3.3.2
3.3.2
3.3.2 Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
