ASROCK ALIVESATA2-GLAN, Руководство пользователя

Страница: 32 / 47

3 2 3 2 3 2 3 2 3 2
3.3 3.3
3.3 3.3
3.3 Advanced Screen Advanced Screen
Advanced Screen Advanced Screen
Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP
Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
Setting wrong values in this section may cause
the system to malfunction.
BIOS SETUP UTILITY
Main H/W Monitor Boot Security Exit
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.
Configure CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
CPU Configuration
Chipset Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
ACPI Configuration
BIOS SETUP UTILITY
CPU Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
[Disabled]
[Auto]
[200]
[Auto]
[Auto]
[Sync. with CPU]
[Enabled]
[Auto]
AM2 Boost
CPU Host Frequency
Actual Frequency (MHz)
Spread Spectrum
Boot Failure Guard
PCIE Freq Select
PCI Freq Select
Cool' n' Quiet
Memory Clock
Memory Channel Mode
Flexibility Option
CAS Latency
TRAS
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
If AUTO, multiplier and
voltage will be left at the
rated frequency/voltage. If
Manual,
will be set based
on User Selection in Setup.
multiplier and
voltage
Processor Maximum Multiplier
Processor Maximum Voltage x11 2200 MHz
1.450 V
Multiplier/Voltage Change [Auto]
3.3.1 3.3.1
3.3.1 3.3.1
3.3.1 CPU Configuration CPU Configuration
CPU Configuration CPU Configuration
CPU Configuration
AM2 Boost
If you set this option to [Enabled], you will enable ASRock AM2 Boost
function, which will improve the memory performance. The default value is
[Disabled]. Please refer to caution 6 on page 8 for details.
CPU Host Frequency
Use this item to select CPU Host Frequency Mode. The default value is
[Auto].