ASROCK ALIVENF5SLI-1394, Руководство по установке

Страница: 34 / 228

3 4 3 4
3 4 3 4 3 4
ASRock ALiveNF5SLI-1394 Motherboard
EnglishEnglishEnglishEnglishEnglish
2.16 2.16 2.16 2.16 2.16 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology echnology echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk before
you apply Untied Overclocking Technology.
2.15.2 Installing Windows 2.15.2 Installing Windows
2.15.2 Installing Windows 2.15.2 Installing Windows
2.15.2 Installing Windows
®
Vista Vista
Vista Vista
Vista
TM TM
TM TM
TM
/ Vista / Vista
/ Vista / Vista
/ Vista
TM TM
TM TM
TM
64-bit With 64-bit With
64-bit With 64-bit With
64-bit With
RAID Functions RAID Functions RAID Functions RAID Functions RAID Functions
If you want to install Windows
®
Vista
TM
or Windows
®
Vista
TM
64-bit on your SATA /
SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit OS on your
system.
Insert the Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit optical disk into the optical
drive to boot your system, and follow the instruction to install Windows
®
Vista
TM
/
Windows
®
Vista
TM
64-bit OS on your system. When you see “Where do you want to
install Windows?” page, please insert the ASRock Support CD into your optical drive,
and click the “Load Driver” button on the left on the bottom to load the NVIDIA ® RAID
drivers. NVIDIA ® RAID drivers are in the following path in our Support CD:
.. \ I386 (For Windows ® Vista TM OS)
.. \ AMD64 (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows ® Vista TM / Windows ® Vista TM 64-bit optical disk into
the optical drive again to continue the installation.
NOTE. If you install Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit on IDE HDDs and want to
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please set
the RAID configuration by using the Windows RAID installation guide in the following
path in the Support CD:
.. \ RAID Installation Guide