ASROCK AD410PV, Руководство пользователя

Страница: 37 / 46

3 7 3 7 3 7 3 7 3 7
TYPE
Use this item to configure the type of the IDE device that you specify.
Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].
[Not Installed]: Select [Not Installed] to disable the use of IDE device.
[Auto]: Select [Auto] to automatically detect the hard disk drive.
BIOS SETUP UTILITY
SATAII_1
Select the type
of device connected
to the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S . M . A . R . T .
32Bit Data Transfer
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]
Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
S.M.A.R.T. :Hard Disk
:ST340014A
:40.0 GB
:Supported
:16Sectors
:4
:MultiWord DMA-2
:Ultra DMA-5
:Supported
BIOS SETUP UTILITY
Storage Configuration
Configure SATA
operation mode.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
SATA Operation Mode
[IDE]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
SATAII_1
SATAII_2
[Hard Disk]
[Not Detected]
3.4.4 3.4.4 3.4.4 3.4.4 3.4.4 Storage Configuration Storage Configuration Storage Configuration Storage Configuration Storage Configuration
SATA Operation Mode
Use this to select SATA operation mode. Configuration options: [IDE], [AHCI]
and [Disabled]. The default value is [IDE].
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “SATAII_1” as the example in the following instruction.