ASROCK A780GMH 128M страница 8 Скачать руководство пользователя

Страница: 8 / 58

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

This motherboard supports Untied Overclocking Technology. Please read “Un-

tied Overclocking Technology” on page 37 for details.

This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 17 for proper

installation.

Whether 1066MHz memory speed is supported depends on the AM2+ CPU

you adopt. If you want to adopt DDR2 1066 memory module on this

motherboard, please refer to the memory support list on our website for

the compatible memory modules.

ASRock website http://www.asrock.com

Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

and Windows

Vista

. For Windows

XP 64-bit and Windows

Vista

64-

bit with 64-bit CPU, there is no such limitation.

The maximum shared memory size is defined by the chipset vendor

and is subject to change. Please check AMD website for the latest

information.

1080p Blu-ray (BD) / HD-DVD playback support on this motherboard re-

quires the proper hardware configuration. Please refer to page 10 and 11

for the minimum hardware requirement and the passed 1080p Blu-ray

(BD) / HD-DVD films in our lab test.

Hardware

- CPU Temperature Sensing

Monitor

- Chassis Temperature Sensing

- CPU/Chassis/Power Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

- Microsoft

Windows

XP / XP Media Center / XP 64-bit /

Vista

/ Vista

64-bit compliant

Certifications

- FCC, CE, Microsoft

WHQL Certificated

* For detailed product information, please visit our website: http://www.asrock.com

Содержание A780GMH 128M


























































Результаты поиска

Содержание A780GMH 128M

Отзывы:

Похожие инструкции для A780GMH 128M

Бренды по названию

Популярные бренды

ASROCK A780GMH 128M, Руководство пользователя

Результаты поиска

Содержание A780GMH 128M

Отзывы:

Похожие инструкции для A780GMH 128M

Бренды по названию

Популярные бренды