ASROCK A780GMH 128M Скачать руководство пользователя

Страница: 36 / 58

3 6

2.15

2.15 Installing Windows

Installing Windows

XP / XP 64-bit / Vista

Vista

64-bit W

64-bit Without RAID F

ithout RAID F

ithout RAID Functions

unctions

If you want to install Windows

XP, Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow

below procedures according to the OS you install.

NOTE1. If you install Windows

Vista

/ Windows

Vista

64-bit on IDE HDDs and want to

manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,

you still need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please

set the RAID configuration by using the Windows RAID installation guide in the

following path in the Support CD:

.. \ RAID Installation Guide

NOTE2. Currently, if you install Windows

Vista

/ Windows

Vista

64-bit on IDE HDDs

and there are no SATA / SATAII device used, please set up “SATA Operation Mode”

to [IDE] in BIOS.

2.15.1 Installing Windows

XP / XP 64-bit Without RAID

Functions

unctions

If you want to install Windows

XP or Windows

XP 64-bit on your SATA / SATAII HDDs

without RAID functions, please follow below steps.

STEP 1: Set Up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [IDE].

STEP 2: Make a SATA / SATAII driver diskette.

Make a SATA / SATAII driver diskette by following section 2.14.1 step 2 on page 34.

STEP 3: Set Up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [AHCI].

STEP 4: Install Windows

XP / Windows

XP 64-bit OS on your system.

You can start to install Windows

XP / Windows

XP 64-bit OS on your system. At the

beginning of Windows

setup, press F6 to install a third-party AHCI driver. When prompted,

insert the SATA / SATAII driver diskette containing the AMD AHCI driver. After reading the

floppy disk, the driver will be presented. Select the driver to install according to the OS

you install. (Select “AMD AHCI Compatible RAID Controller-x86 platform” for Windows

XP, or “AMD AHCI Compatible RAID Controller-x64 platform” for Windows

XP 64-bit.)

Using SATA / SATAII HDDs without NCQ and Hot Plug functions

Using SATA / SATAII HDDs with NCQ and Hot Plug functions

STEP 1: Set up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows

XP / Windows

XP 64-bit OS on your system.

Содержание A780GMH 128M


























































Результаты поиска

Содержание A780GMH 128M

Отзывы:

Похожие инструкции для A780GMH 128M

Бренды по названию

Популярные бренды

ASROCK A780GMH 128M, Руководство пользователя

Результаты поиска

Содержание A780GMH 128M

Отзывы:

Похожие инструкции для A780GMH 128M

Бренды по названию

Популярные бренды