ASROCK A330ION, Руководство по установке

Страница: 17 / 101

1 7 1 7 1 7 1 7 1 7
ASRock A330ION Motherboard
EnglishEnglishEnglishEnglishEnglish
n
12
1
24
13
2.8 2.8
2.8 2.8
2.8 Serial A Serial A
Serial A Serial A
Serial ATTTTTA (SA A (SA
A (SA A (SA
A (SATTTTTA) / Serial A A) / Serial A
A) / Serial A A) / Serial A
A) / Serial ATTTTTAII (SA AII (SA
AII (SA AII (SA
AII (SATTTTTAII) Hard Disks AII) Hard Disks
AII) Hard Disks AII) Hard Disks
AII) Hard Disks
Installation Installation Installation Installation Installation
This motherboard adopts NVIDIA
®
MCP7A-ION chipset that supports Serial ATA
(SATA) / Serial ATAII (SATAII) hard disks and RAID functions. You may install SATA
/ SATAII hard disks on this motherboard for internal storage devices. This section
will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2.9 Hot Plug and Hot Swap F 2.9 Hot Plug and Hot Swap F
2.9 Hot Plug and Hot Swap F 2.9 Hot Plug and Hot Swap F
2.9 Hot Plug and Hot Swap Functions for SA unctions for SA
unctions for SA unctions for SA
unctions for SATTTTTA / SA A / SA
A / SA A / SA
A / SATTTTTAII AII
AII AII
AII
HDDs HDDs
HDDs HDDs
HDDs
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII in
RAID / AHCI mode. NVIDIA ® MCP7A-ION chipset provides hardware support for
Advanced Host controller Interface (AHCI), a new programming interface for SATA
host controllers developed thru a joint industry effort.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called
“Hot Plug” for the action to insert and remove the SATA / SATAII HDDs
while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATAII HDD.
What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID1 then it is called “Hot Swap” for
the action to insert and remove the SATA / SATAII HDDs while the system
is still power-on and in working condition.
For Powered eSATA function, Hot Plug function is supported in RAID /
AHCI mode only.