ASROCK 939SLI32-ESATA2, Руководство по установке

Страница: 28 / 152

2 8 2 8
2 8 2 8 2 8
ASRock 939SLI32-eSATA2 Motherboard
EnglishEnglishEnglishEnglishEnglish
2.13 2.13 2.13 2.13 2.13 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology echnology echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI and PCIE buses are in the fixed mode so that FSB
can operate under a more stable overclocking environment.
2.12 2.12
2.12 2.12
2.12 Using SA Using SA
Using SA Using SA
Using SATTTTTA / SA A / SA
A / SA A / SA
A / SATTTTTAII HDDs W AII HDDs W
AII HDDs W AII HDDs W
AII HDDs Without RAID F ithout RAID F
ithout RAID F ithout RAID F
ithout RAID Functions unctions
unctions unctions
unctions
If you want to install Windows 2000, Windows XP, or Windows XP 64-bit OS on your
SATA / SATAII HDDs without RAID functions, you are allowed to choose non-RAID
mode or AHCI mode. For users who plan to install Windows 2000, Windows XP, or
Windows XP 64-bit OS on your SATA / SATAII HDDs without RAID and Hot Plug
functions, please choose non-RAID mode. However, if you plan to install Windows
2000, Windows XP, or Windows XP 64-bit OS on your SATA / SATAII HDDs without
RAID functions but still keeping Hot Plug function, please choose AHCI mode.
Please follow the below procedures for selecting the mode you need.
A. Using SATA / SATAII HDDs Operating in Non-RAID Mode
1. Enter “SATA Operation Mode” in BIOS setup to set the option from [RAID] to [non-
RAID].
2. Start Windows 2000, windows XP, or Windows XP 64-bit OS installation.
B. Using SATA / SATAII HDDs Operating in AHCI Mode
1. Enter “SATA Operation Mode” in BIOS setup to set the option from [RAID] to [AHCI].
2. Make a SATA / SATAII driver diskette by following the proper steps of section 2.11
on page 27.
3. Start Windows 2000, windows XP, or Windows XP 64-bit OS installation.