22
23
English
2.7 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No. 45)
Normal Mode (Default)
ME Recovery Mode
NCSI Mode Jumper
(3-pin NCSI_SEL1)
(see p.6, No. 47)
NCSI is set to onboard
LAN1 (Default)
NCSI is set to Mezzanine
Card
Descriptor Security Over-
ride Jumper
(3-pin J100)
(see p.6, No. 4)
Descriptor Security Over-
ride
Not Override (Default)
CPU PECI Mode Jumper
(3-pin PECI_SEL1)
(see p.6, No. 34)
CPU PECI connect to PCH
CPU PECI connect to BMC
(Default)
PMBUS Mode Jumper
(3-pin PMBUS_SEL_ALT1)
(see p.6, No. 12)
(3-pin PMBUS_SEL_DAT1)
(see p.6, No. 11)
(3-pin PMBUS_SEL_CLK1)
(see p.6, No. 13)
PMBus loads the data via
BMC chip (Default)
PMBus loads the data via
PCH chip
