18
19
English
2.7 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Security Override Jumper
(3-pin SEC_OR1)
(see p.6, No. 17)
Descriptor Security
Override
Not override (Default)
CHASSIS ID Jumper
(3-pin CHASSIS_ID0)
(see p.6, No. 24)
Descriptor Security
Override
Not override (Default)
