4U60L Series
15
English
Chapter 3 Hardware Installation and
Maintenance
his chapter helps you assemble the chassis and install components.
Before You Begin
Before you work with the server, pay close attention to the “Important Safety Instructions”
at the beginning of this manual.
1. Make sure the server is powered of.
Power down the server if it is still running.
(1) Press the Power button to power of the server from full-power mode to power-of
mode. he Power LED at the front turns from solid green to of.
(2) Disconnect the power cord irst from the AC outlet and then from the server.
he power LED turns of.
2. Ensure you have a clean and stable working environment. Avoid dust and dirt because
contaminants may cause malfunctions.
3. Ground yourself properly before touching any system component. A discharge of static
electricity may damage components. Wear a grounded wrist strap if available.
he server is not completely powered down when you press the Power button on the front
panel. Some internal circuitry remain active in the Power-of mode. To remove all power
from the system completely, be sure to disconnect the power cord from the server.
Ater all components are well installed, then you can connect the power cord to the AC
outlet and then press the Power button to power on the server.
