
ASR Audio Systems Friedrich Schaefer, D-35745 Herborn, Germany +49 / 2772 – 42 905
High End Integrated Amplifier ASR Emitter I and II version 2009 on Page 2
Dear music lover,
all of us at ASR would like to offer
thanks
and
congratulations
to you for purchasing the
ASR Emitter High End Integrated Amplifier
. We sincerely believe that your new ASR Emitter
will enjoy you for
many years
with
musical pleasure
.
All ASR products are
hand-mad
e with greatest care to details with
high-grade
selected
parts
.
Enjoy your music
even more with this true High End Integrated Amplifier!
While every new owner is anxious to begin listening, we encourage you to
take a few minutes
to
read this manual and
familiarize
yourself with the
full capabilitie
s of the
ASR Emitter
.
1.0
Receiving the ASR Emitter – First moves
1.1
Unpacking the ASR Emitter
Use care in unpacking your ASR Emitter. Please don’t cut the tapes of the wrapping and keep
the packing for maybe necessary transports. Please inspect the units for any shipping damage
and call your dealer immediately if any is found.
! Do not plug your ASR Emitter into an AC outlet if you find shipping damage !
The shipment contains of the following items and accessories :
a)
Integrated amplifier ASR Emitter
main unit with three golden or chromium control knobs
b)
Separate power supply (ASR Emitter I = one, ASR Emitter II = two)
(ground switch at the backside) incl. one/two shielded ASR power cords
c)
ASR
remote control
d)
repair-set
(1x 3 mm-Allen-wrench, replacement screws M4 x 16, fuses )
e)
Care-set
( 1x bottle of antistatic plastic-cleaner and a special cloth )
f)
Battery Power Supply
(no controls) inclusive one ASR power cord
(available only for the ASR Emitter Exclusive versions)
.1.2
Important safety precautions
To get the best performance from your ASR Emitter, and for your own safety, please
read
and
follow
these important
safety instructions
.
! Damage caused by improper operation is not covered by the ASR warranty !
1.
Never place
the ASR Emitter or the power supply units
near heat sources
such as
radiators, fireplaces, stove, or other appliances that produce heat. Avoid also placing the ASR
Emitter where it will be subject to direct sunlight or low temperatures.
Check to make sure, that your ASR Emitter has been manufactured for operation at the
AC line voltag
e that is used in
your country
. Attempting to use your ASR Emitter at any
voltage other than the specified on the power supply’s back side may damage the unit.
If the voltage specified is different from your AC voltage, contact your ASR dealer.