Aspire EAB30-LP, Инструкция по использованию и уходу

Страница: 21 / 48

©2017 Hestan Commercial Corporation
19
EN
ELECTRICAL SUPPLY
(continued)
KEEP ANY ELECTRICAL CORD AND FUEL SUPPLY HOSE AWAY FROM ANY HEATED SURFACES.
1. To protect against electric shock, do not immerse cord or plugs in water or other liquid.
2. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking
off parts.
3. Do not operate any outdoor cooking gas appliance with a damaged cord or plug, or after the appliance
malfunctions or has been damaged in any manner. Contact the manufacturer for repair.
4. Do not let the cord hang over the edge of a table or touch hot surfaces.
5. Do not use an outdoor cooking gas appliance for purposes other than intended.
6. Use only a Ground Fault Circuit Interrupter (GFCI) protected circuit with this outdoor cooking gas
appliance.
7. Never remove the grounding prong or use with a 2-prong ground adapter.
8. Use only extension cords with a 3-prong grounding plug, rated for the power of the equipment, and
approved for outdoor use with a W-A marking.
ELECTRICAL BOX
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
Some parts have sharp edges. Care must be taken when handling the various components to avoid personal
injury. Wear gloves when handling.
1. If you are installing your grill in a cart, please consult the instruction manual that came with your cart.
If you are installing your grill in an enclosure (see image below), you should locate the electrical box on
the inside rear wall below the grill, or in a convenient location to access the box for service, or to replace
a fuse. Leave some slack in the cables between the grill and box so as not to stretch the wires and make
disconnection easier for service.
2. The electrical box has 2 mounting holes on either side to attach to a wall or other structure (mounting
hardware not included). The box should be approx. 8” above the ground to avoid water intrusion under
your island. See the INSTALLATION section of this manual for details.
3. Once mounted, connect the white connectors from your grill to the appropriate receptacles on top of
the electrical box. The grill is designed for 120 volt AC power and must be plugged into a Ground Fault
Circuit Interrupter (GFCI) protected circuit. Do not connect the grill to the electrical supply until after
gas connections have been made and leak checks have been performed.
KEEP ANY ELECTRICAL CORD AND FUEL SUPPLY HOSE AWAY FROM ANY HEATED SURFACES.