21
20
www.comfimotion.com.au
NOTE:
It is suggested that an impact driver or drill is used to speed up this process. Using a Phillips head
screwdriver will work but will take more time. If the impact Driver/Drill has a clutch setting, it should be
set to low torque to minimise any risk of bolt misalignment or mount point damage.
NOTE:
Headboards can be mounted to the
LUXE Bed only.
CAUTION:
When bed is in raised position, Headboard will raise with bed and poses risk to damaging of fixings or
attachments on walls.
Raise bed height, backrest and knee break to maximum height for ease of access.
a. Locate threaded mounting holes (2 per side) at head end of bed.
b. Line up bracket over threaded mounting holes and mount in place by rotating phillips head bolt through the
top and bottom mounting holes.
c. Repeat on both sides, ensuring 4 x bolts (2 per side) are fastened in place.
LUXE Handset
1
2
Locate mounting holes for screw insertion. To locate holes:
BACKREST
Raise to Max.
HI-LO
Raise to Max.
Hi
30MIN
20MIN
10MIN
M
LOUNGE
TV/PC
ANTI
SNORE
PAIR
MASSAGE
TYPE
MASSAGE
FOOT
MASSAGE
ON/OFF
P O S I T I O N S
M A S S A G E
M A S S A G E
MASSAGE
HEAD
ZG
Lo
Hi
30MIN
20MIN
10MIN
M
LOUNGE
TV/PC
ANTI
SNORE
PAIR
MASSAGE
TYPE
MASSAGE
FOOT
MASSAGE
ON/OFF
P O S I T I O N S
M A S S A G E
M A S S A G E
MASSAGE
HEAD
ZG
Lo
Hi
30MIN
20MIN
10MIN
M
LOUNGE
TV/PC
ANTI
SNORE
PAIR
MASSAGE
TYPE
MASSAGE
FOOT
MASSAGE
ON/OFF
P O S I T I O N S
M A S S A G E
M A S S A G E
MASSAGE
HEAD
ZG
Lo
LEGREST
Raise to Max.
Fig 1.
Bed once adjusted.
HOW TO MOUNT TO BED
7.2.2 OPTION 2.
For use on the:
LUXE BED
CARE BED
FIXED COMPANION BED
Tools Required:
• Impact driver or drill (5mm attachment)
• Phillips head screw driver (5mm)
Align bracket fixings (headboard bracket will slide into bed frame bracket), Slide headboard down until both
brackets click into place, the headboard is now in place.
NOTE:
Headboard foot supports will rest on the ground when in lowest height.
a. Line bracket up with foot stopper (on base of headboard).
i. Ensure bracket is spaced approx. 40mm from edge of headboard.
ii. Ensure bracket is spaced approx. 60mm from base of headboard.
b. Through rotation the screw will pierce through the fabric and thread into wood frame (self-tap).
Repeat on both sides, ensuring 8x screws (4 per side) are fastened in place.
c. Using an impact driver, rotate screw through the upholstery inwards towards frame.
d.
NOTE:
Position of bracket should be as per measurements otherwise it will not fit securely to the bed
frame.
3
4
When mounting brackets to bed end:
