This hob must be connected to the mains power supply only by a suitably qualified
person. Before connecting the hob to the mains power supply, check that:
1.
The domestic wiring system is suitable for the power drawn by the hob.
2.
The voltage corresponds to the value given in the rating plate
3.
The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualified electrician.
APV1201 APV2303
If the cable is damaged or to be replaced, the operation must be carried out the by
after-sale agent with dedicated tools to avoid any accidents.
If the appliance is being connected directly to the mains an omnipolar circuit-breaker
must be installed with a minimum opening of 3mm between contacts.
The installer must ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised technicians only.
The bottom surface and the power cord of the hob are not accessible after
installation.
Technical Specification
Cooking Hob
APV1201
Cooking Zones
2 Zones
Supply Voltage
220-240V~ 50-60Hz
Installed Electric Power
3000W
For circular cooking zones: diameter of useful surface area
per electric heated cooking zone, rounded to the neastest
5mm
Front
: 190mm
Rear t: 155mm
Energy consumption per cooking zone or area calculated per
kg (EC electric cooking)
F
ront
: 185.84Wh/kg
Rear:194.91 Wh/kg
Energy consumption of the hob, calculated per kg (EC
electric hob)
190,37 Wh/kg
Cooking Hob
APV2303
Cooking Zones
3 Zones
17
