installation. Adjust the bracket position to suit for different table top thickness.
9.6
Cautions
1.
The hob must be installed by qualified personnel or technicians. We have professionals
at your service. Please never conduct the operation by yourself.
2.
The hob will not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the hob electronics
3.
The hotplate shall be installed such that better heat radiation can be ensured to
enhance its reliability.
4.
The wall and induced heating zone above the table surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.
A steam cleaner is not to be used.
9.7
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified
person. Before connecting the hob to the mains power supply, check that:
1.
The domestic wiring system is suitable for the power drawn by the hob.
2.
The voltage corresponds to the value given in the rating plate
3.
The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any
point.
Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualified electrician.
APV1201 APV2303 API2300I
•
If the cable is damaged or to be replaced, the operation must be carried out the by
after-sale agent with dedicated tools to avoid any accidents.
