Aspen Aire KJ380G-CW28, Руководство пользователя

Страница: 11 / 60

08
Operating Instructions
4.2.3 Manual Filter Replacement Mode
You may change the filter according to the seriousness of the air pollution
in the environment. The filter light indicator may not be lighted up at this
moment.
Please follow the operating instructions below after replacing the filter:
Please do it during standby mode (product is connected to electricity but
the control panel is yet to be switched on). Press for 5 seconds and all
filter light indicators will light up. Touch and the filter indicator light
(1 2 3) will be blinking in sequence, one after another. When the blinking
light reaches the filter you want to replace, press for 3 seconds and
the light will go off. Meanwhile, the filter life timer is reset for the selected filter.
Repeat the above steps to change other filters.
The manual filter replacement mode will stop automatically if you touch
or if mode is idle for 60 seconds.
4.3 Fan Speed
You may choose the required fan speed. The fan speed is 1 (low speed)
when the unit is switched on.
1. Press the button to switch on the product.
2. Press the button continuously to change to the desired fan speed.
Friendly Reminder:
• If the air quality colour indicator turns blue, it means the air quality is good. You
may choose to lower the fan speed.
4.4 Timer Setting
1. Press to switch on the product.
2. Press to switch on the timer function. Light indicator (2h/ 4h/ 8h)
will light up.
3. Press continuously to choose the length of time you want the
product to operate. The light indicator of the chosen time will light up.
Please press continuously until the light indicator is off if you would
like to terminate the timer function.
Friendly Reminder:
•
The remaining length of time will be displayed. If the timer is set at 8 hours, 4 will
be displayed after 4 hours had passed. After 2 more hours had passed, 2 will be
displayed and this will continue until the time that is set ends.