Z4 DataTraq
3
Quick Start: RS-232 Y Cable Connection
1. Set your Z4 DataTraq to RS-232 using
Function 02
, making sure to
select the correct baud rate and parameters to suit your application.
2. Connect the plug pack power supply to a power point, and plug it
into the socket labelled
DC.9V
on the back of the Homebase.
3. Unplug the RS-232 cable from the back of your terminal, and plug in
the Y cable in its place. Plug the RS-232 cable into the Y cable.
4. Plug the other end of the Y cable into the socket labelled
RS-232
on
the back of the Homebase.
5. Plug the cable at the front of the Homebase into the connector on the
Z4 DataTraq labeled
HOMEBASE
– the green light labelled
CHARGE
on the front of the Homebase should now be lit.
6. Plug your wand or scanner into the connector on the Z4 DataTraq
labeled
WAND
.
7. Turn on your Z4 DataTraq and start scanning barcodes!
