![background image](http://html1.mh-extra.com/html/asp/z4-datatraq/z4-datatraq_user-manual_2984663006.webp)
Z4 DataTraq
2
Quick Start: PC Keyboard Connection
1. Set your Z4 DataTraq to IBM AT using
Function 02
.
2. Connect the plug pack power supply to a power point, and plug it
into the socket labelled
DC.9V
on the back of the Homebase.
3. Turn your PC off, then unplug your PC’s keyboard from the back of
your computer, and plug it into the socket labelled
KEYBOARD
on the
back of the Homebase.
4. Plug one end of the PC cable into the socket labelled
COMPUTER
on
the back of the Homebase, and the other end into the socket that you
unplugged your keyboard from at the back of your computer.
5. Plug the cable at the front of the Homebase into the connector on the
Z4 DataTraq labeled
HOMEBASE
– the green light labelled
CHARGE
on the front of the Homebase should now be lit.
6. Plug your wand or scanner into the connector on the Z4 DataTraq
labeled
WAND
.
7. Turn your PC back on.
8. Turn on your Z4 DataTraq and start scanning barcodes!