ASP Portable Barcode Reader
13
26
Displays the active template if one is set, using the format described in
Function 25
.
28
Allows a unit number to be set, from 0 to 255. This facility can be useful
when multiple units are used so that data from a particular unit can be
identified.
29
Displays the barcode type and scan direction for the last barcode scanned.
Under certain conditions, this information may not be available.
30
Lists the loaded custom program to the computer.
31
Exits from a custom program, and restores the Portable BCR to normal
mode. The custom program can be restarted by using
Function 32
, or
by turning the power off then on again.
32
Restarts a loaded custom program.
50
Downloads storage memory to computer 50 lines at a time. The number of
lines downloaded at a time can be changed with
Function 59
.
59
Sets the number of lines downloaded at a time with
Function 50
. Can
be set to any value from 1 to 255, or to zero for a default of 50 lines.
Test and Diagnostic Functions
The following functions may result in data stored in your Portable BCR being
permanently lost.
DO NOT USE THESE FUNCTIONS
unless instructed to
do so by ASP or your Dealer.
91
Clears every byte of memory, then resets. After using this function, the
entire contents of memory will be erased, and all configuration settings will
be lost.
93
Sets test and debug modes.
94
Erases the contents of storage memory, then fills storage memory with
incrementing 5 digit numbers.
99
Displays a test pattern on LCD screen.
