Asotel Vector F336E/2LL, Руководство пользователя

Страница: 17 / 25

15
CHAPTER 3
V.25bis COMMAND
V.25bis Command set
CRN
n
Dialing Command
This command dials a telephone number specified by the
parameter "n". The "n" in this command is a dial string
which includes telephone number 0 to 9, and #, * for tone
dialing only, dial modifiers (please refer to ATD
s
command). Any dial modifier specified in ATD command
is valid here in ITU-T V.25bis command mode. There are
four extra dial modifiers that V.25bis defined listed below:
: Same definition as "W" modifier in the ATD command.
< Same definition as "
,
" modifier in the ATD command.
& Same definition as "!" modifier in the ATD command.
= Same definition as "
;
" modifier in the ATD command.
CRS
n
Dialing Stored Number Command
Dials the telephone number that previously stored in
memory location
n
. Where
n
= 0~9.
PRN
m
;
n
Stored Telephone Number in Location m
This command stores telephone number in memory
location
m
for later dialing. It is identical with the AT&Z
command in AT command mode. Where
m
= 0~9. The
n
is a dial string of up to 35 characters. Valid dial string
characters are 0 to 9, dial modifiers, and for tone dialing
#, *.
RLN
Display the Stored Telephone Number
This command shows the ten (location 0 to 9) stored
telephone numbers.
DIC Disregard Incoming Call
The DIC command disables the auto answer function of
the modem in ITU-T V.25bis operation mode.
CIC Connect Incoming Call