Signalling Packet:
DSCP Code: 10 <====== Configure control signal DSCP code
Media Packet:
DSCP Code: 10 <====== Configure RTP (voice) DSCP code
usr/config$
Or, the ToS function can be configured via Web Browser selection by entering the above
DSCP Decimal Code.
This command is for setting IP packet TOS values to determine IP Packets priority on
network.
1.
: display current TOS values configurations.
2.
-sigtype
:configure DSCP value of signaling packets from 0 to 63
3.
-rtptype
:configure DSCP value of RTP packets from 0 to 63
Note:
1. This command won’t be functional until network environment can be
capable with TOS function.
2. tos -rtptype 14 -sigtype 10 is top priority of package.
16. [tone] command
IP PHONE is configurable of busy tone, reorder tone, ring tone and dial tone. However,
only ring tone and dial tone is functional for now, busy tone and reorder tone are
reserved for future feature.
Usage tone –ringtone1/ringtione2/dialtone “low frequency” “high frequency”
“low frequency level” “high frequency level” “low frequency on time” “low
frequency off time” “high on time” “high frequency off time”
; user must key in 8
sets of number to finish this configuration. If it is single-frequency tone, please set high
frequency and related items as 0. Furthermore, unit of on/off time is 1/100 second, and
suggest to keep level as default value (8).User can also increase the value of level to
30
