2.LCD Configuration
User can set the following 10 configurations manually by operating the commands
displayed on LCD.
Note: Any configurations that have made for the IP PHONE, user has to do
Reboot
in the
selection 1
→
5 “Reboot”.
1. System Configuration (mandatory, protected by password)
Please Enter Password:
User must key in password to enter this menu, selections under this command
are all important ones, which can only be configured by administrators.
Note:
1.Password to enter System Configuration:
H.323 token password (please refer to item 9), default value is
x
. (Please press
TRANSFER button to switch as lowercase characters first.)
2.If user forget password, please contact with our company, we will generate a specific
password according to MAC address of IP PHONE.
1. Connect Configuration
There are ten sub-configurations included in
Connect Configuration
. It is
necessary for user to set it in order to run the IP PHONE correctly.
In addition, user has to prepare one valid IP Address to meet your network
environment. (Global public IP Address or Virtual IP Address)
(1) IP address
In this configuration mode, user presses the prepared IP Address on the IP
PHONE keypad. Please input IP address as format: xxx.xxx.xxx.xxx.
(2) Subnet Mask:
User has to press the subnet mask IP Address on the IP PHONE keypad
.
(3) Gateway
User has to press the default gateway IP which meets IP Address on the IP
PHONE keypad.
(4) Primary DNS
User can set IP address of Domain Name Server, then for GateKeeper and
Phone book can enter URL address or IP address. Please refer to
3.9
[pbook]
and
3.12 [h323]
command.
(5) Secondary DNS
User can set IP address of secondary DNS, once primary DNS cannot
work normally, IP PHONE can refer to secondary DNS.
(6) GateKeeper
11
