- 9 -
3.6
Re-install the Housing
When finishing Micro SD card installation or factory default, please re-install the parts as the following order (A
to E) and end up with tightly fastening the screws.
A). To ensure water-proof function, do certainly locate the waterproof rubber in place (see the right figure)
before installing the back cover.
B). Put the PCBA into the camera body.
C). Put the desiccant bag in.
D). Install the back cover.
E). Fasten the screws tightly.
Note:
1.
There is one additional unopened desiccant (
silica gel
) inside the housing for spare.
2.
To ensure fog-proof function, do replace the desiccant bag with a new one, when it’s necessary to
re-install the camera. An unopened silica gel bag can last about 3 months, however, the durability could be
shortened under severe environment.
3.
Silica Gel
is the recommended desiccant type to ensure fog-proof function. If the desiccant bag is run out,
please purchase and replace with this type.
Содержание CAM728MIR
Страница 1: ...1 2 Megapixels Bullet Network Camera CAM728MIR CAM728MIR PoE User s Manual...
Страница 8: ...8 Pin 6 Pin 5...
