- 7 -
properly after installing Micro SD card, and caused the unit's waterproof function failed.
Note:
1.
The device does not support Hot-Swapping function.
2.
Tweezers is recommended to help insert the Micro SD card.
3.
This unit supports minimum 2GB and max 32GB Micro SD/SDHC card and Class 6 or higher for
smooth operation.
3.5
Using the Terminal Block
The network camera comes with a Terminal Block
that can offer multiple functions to the user:
Pin 1 ~ 4:
Intended for triggering and receiving alarms
for the Event Configuration feature.
Pin 5, 6:
Terminal block also provides 2 pins, Pin 5 and
6, for “load default”. With 2 wires connected to Pin 5
& 6, keep 2 wires in touch until System LED fast
flashing. Then, separate them to activate “load
default”.
Connecting Alarm devices
Connect Pin 1 and Pin 2 for an external relay device such as an alarm that expects to be activated.
Connect Pin 3 and Pin 4 for an external Triggering device for sending a signal into the Network
Camera.
Refer to Chapter 5) Configuring the camera, Event
Settings for more references on
how to use the even trigger and alarm to perform tasks such as taking snapshots and uploading
images.
Load default
With 2 wires connected to Pin 5 & 6, keep 2 wires in touch (or close circuit) until System LED fast
flashing. Then, separate (or open) them to activate “load default”.
Pin 1
COM (Relay Common)
Pin 2
D-OUT (Relay Normal
Open/Close)
Pin 3
D-IN (Digital Input)
Pin 4
GND (Ground)
Pin 5
GND (Ground)
Pin 6
DEFAULT (Load Default)
Terminal Block Definition
1 2 3 4 5 6
Pin 1 Pin 2
Pin 3
Pin 4
Содержание CAM728MIR
Страница 1: ...1 2 Megapixels Bullet Network Camera CAM728MIR CAM728MIR PoE User s Manual...
Страница 8: ...8 Pin 6 Pin 5...
