73
7. Factory Default
To recover the default password and other settings, please follow the steps:
1. Power off this device.
2. Release the 4 screws on the rear panel, and then remove the rear panel.
3. Use a screw driver to push the "Factory Default Button", keeping push it and don't
release.
4. Power on the device. Don’t release the button during the system booting.
5. It will take around 30 seconds to boot the device.
6. Release the button when the device finishes proceed.
7. Re-login the device using the default username (admin) and password (admin).
8. The IP address is probably restored to the default, in this case, use IP Search
utility to search the device. The default IP address is 192.168.1.200
Factory Default Button
Содержание CAM679F
Страница 10: ...9 B Monitor Setting 1 Right Click on the desktop Select Properties 2 Change color quality to Highest 32bit ...
Страница 14: ...13 1 2 3 4 5 When popup the following dialogue box click Yes ...
Страница 35: ...34 C Network Setting Network Setting Network Setting ...
Страница 45: ...44 settings of mail FTP or Samba network storage are correct ...