Asoni CAM6709H, Руководство пользователя

Страница: 8 / 82

7

Power Jack:
To connect the DC 12V power adapter.

Network Connector:
The RJ-45 connector allows connect to the Ethernet network.

Terminal Block:
The terminal block provides the following functionalities:

DI/ DO: Digital In and Digital Out.

Audio Out: Allows connect to an amplified speaker, you can
hear the voice of the remote site from the speaker.

Microphone:
The built-in microphone to receive the voice.

Micro-SD Card Slot:
Insert a Micro-SD card if you want to do the event recording in
the camera.
1. Connect the cable of Digital I/O, Video output, Audio output and Microphone input if
you want to use these functionalities.
2. Connect Ethernet cable for network connection.
3. Connect power adapter to turn on the camera.
4. If the camera is PoE model, the power adapter is not necessary. The camera will get
the power from the PoE injector or PoE switch.
PoE (Power over Ethernet) is a technology that integrates power into a standard LAN
infrastructure. It enables power to be provided to the network device, such as an IP
phone or a network camera, using the same cable as that used for network connection.
It eliminates the need for power outlets at the camera locations. Please follow the
below figure for the connection.
5. Set up the network configurations according to the network environment. For further
PoE Switch or PoE Injector
Ethernet Cable
Data only
Ethernet Cable
Mixed data and power
PoE Network Camera
To Network