56
Pre and Post Record Time Setting
Configure the record time for the event recording file. For example, if set “Pre Alarm”
as 3 seconds and set “Post Alarm” as 5 seconds, when an event is triggered at time
10H:05M:10S, the video will be recorded from 10H:05M:07S to 10H:05M:14S.
Note:
Limited by the built-in RAM of this device, when data is too much or video
quality set too high, it will cause recording frame drop or decrease the recording
time of post alarm.
To avoid the “frame drop” situation, please reduce the bitrate of the video. We
recommend connect the device in LAN (Local Network) and set the video as
CBR, and Bitrate less than 1.5Mbps.
Network Disconnection Detect
After enable the check box of “Record Video into SD Card”, when the wire network is
disconnected, it will save the video into local SD card.
Note: When this event is happen, the frame rate of live video and recorded video will
be limited to 5FPS. The longest continue record period of single video file is 20
minutes, and the interval of two video files is fixed with 1 minute.
Specific IP Detection
For the use of recording software, this device supports the detection of the connection
of this device and PC. Whenever the connection is disconnected, it records the video
to local SD card to make sure the video recording is continuous.
Detect IP – Enable / Disable:
Select to enable or disable this function.
IP Address:
The IP address or URL of the PC which installed the recording software.
Detection Interval:
The interval time of the detection.
Содержание CAM6704H
Страница 18: ...17 After set up click Apply to save the settings...
Страница 32: ...31 C Network Setting Network Setting Network Setting...
Страница 40: ...39 settings of mail FTP or Samba network storage are correct...
Страница 52: ...51 E Event Handling Event Setting This device supports multiple event settings Event...
