34
RTSP Server Setting
RTSP Server:
The video stream can be direct retrieve via RTSP connection, you can
close this function by disable this option.
RTSP Authentication:
If you select and enable this function, the remote client must
meet the authentication to retrieve video stream via RTSP connection.
RTSP Port:
Set the port for transfer the video and audio. The default is “554”, change
the port if you want to use router’s NAT (Network Address Translation) to make this
device can be linked from Internet.
RTP Port:
Set the port range of RTP port.
In RTSP mode, you may use TCP and UDP for connecting. TCP connection uses
RTSP Port. UDP connection uses RTP Start and End Port.
Multicast Setting (Based on the RTSP Server)
Multicast addressing is a network technology for the delivery of streaming to a group
of destinations simultaneously using the most efficient strategy to deliver the
messages over each link of the network only once, creating copies only when the links
to the multiple destinations split. To implement the Multicast, a switch or router that
supports Multicast function is necessary in the network.
If your network supports Multicast, you can configure the device to enable this
function by setup the following:
IP Address:
This is the multicast group address the streaming should be sent to. You
Содержание CAM6704H
Страница 18: ...17 After set up click Apply to save the settings...
Страница 32: ...31 C Network Setting Network Setting Network Setting...
Страница 40: ...39 settings of mail FTP or Samba network storage are correct...
Страница 52: ...51 E Event Handling Event Setting This device supports multiple event settings Event...