50
Save to SD Card: When the Digital Input is triggered, record the video or
snapshot into to SD card.
Log:
If “Save to SD Card” option has been selected for action, you can determine
whether send a message to the specific mail address FTP site or Samba network
storage.
E-Mail Subject:
The subject of the E-mail will be sent.
Detection Interval:
This option provides two functions.
The interval time between multiple detections. For example, if the time set to
10 seconds, when the Digital Input is triggered at time 10H:05M:10S, the next
trigger will be accepted after 10H:05M:20S. The triggers between
10H:05M:10S to 10H:05M:19S will not be accepted.
If the “Out” is selected for the action, the Interval means “Digital Output On”
period. For example, if Interval set to 20 seconds, when the Digital Input is
triggered, the Digital Output will be “On” and lasting for 20 seconds, and then
“Off” automatically.
Enable Digital Input Detection in Schedule Time:
Enable this option will automatic
activate the Digital-Input detection with scheduled time and stop the detection in the
other time. Please refer to
Schedule
page to setup the schedule time.
Digital Output Setting
This section is for setup the parameters of Digital Output.
Note: The following settings are available when manually turn on the Relay Out on
Live-View page.
Output Switch Type:
Select the type of the Digital Output switch.
[On/Off Switch]
will be triggered to On or Off constantly.
[Time Switch]
will be triggered to “On” and
lasting for a period time, and then “Off” automatically.
Turn-On Time:
If the Digital Output switch is a “Time Switch”, the lasting time of the
“On” period can be set here.
After set up, click [Apply] to save the settings.
