5
4. If the camera is PoE model, the power adapter is not necessary. The camera will get
the power from the Ethernet cable. Please follow the below figure for the connection.
5. Set up the network configurations according to the network environment. For further
explanation, please refer to
I/O Connections
12V
GND
Digital Input 1
Digital Input 2
Digital Output 1
Digital Output 2
D-
D+
I/O connector – used in application, for e.g., motion detection, event triggering, alarm
notifications. It provides the interface to:
2 sets of Digital Input (Digital In + GND) – The digital inputs for connecting devices
that can toggle between an open and closed circuit, such as PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the status changes
and the input becomes active.
2 sets of Digital Output (Digital Out + GND) – The output to Relay Box or Relay
Board, and switch on the alarm device such as LEDs, Sirens, etc.
PoE Switch or PoE Injector
Ethernet Cable
Data only
Ethernet Cable
Mixed data and power
PoE Network Camera
To Network
