Asoka® User Guide
PlugLink® AV 9560 Wireless Adapter
Page
28
of
40
Figure 10-5: Factory Default Restore Confirmation Popup
Note: There is another way to do a factory reset, to push WPS button for more
than 10 seconds. You may referent the section “How to use the Sec and WPS-
Push Button” on the Chapter 10 to know more details about the buttons’
usage.
Backup and Restoring Configuration Files
The configuration settings are stored within the PL9560-WAP in a
configuration file. This file can be saved (backed up) to a user’s PC and
later retrieved (restored) from the same PC. To backup settings, follow the
instructions below:
1. Click on SYSTEM from the top main menu.
2. Click on Backup Settings from the Sub Navigation Link. The System
Backup Settings page will appear.
3. Click the Save button.
Figure 10-6: Backup Settings Screen
To retrieve (restore) an old PL9560-WAP configuration file from a previous
backup, follow these instructions:
1. Click on SYSTEM from the top main menu.
2. Click on Restore Backup from the Sub Navigation Link. The Restore
Settings page will appear.
3. Locate the file using the Browse button and click Restore.
4. You will be asked to confirm the restoration.
