ASM Polytouch HUDRASYNTH Deluxe Скачать руководство пользователя страница 17

Страница: 17 / 115

When an Access button is pressed, the Right

display and its surrounding controls change

functions to allow instant access to the

most-used parameters. The Page up/down

buttons put all other parameters within easy

reach.

Main Systems

Patch selection

One of the major

functions of this

section is patch

selection. There are

several methods,

and you might use

them all at different

times depending on

what you’re doing.

Patch knob

From the Home page

you can select an

adjacent patch by

turning the Patch

knob a single click in either direction. You

can also jump between the banks if you hold

[SHIFT] while turning the knob.

Left / Right arrows

As with the Patch knob, press one of these

buttons to select an adjacent patch. Hold

[SHIFT] first to make the buttons jump

through the patches 10 at a time.

Browse

This page lets you alter the way the patches

are presented in each bank. There are three

different sort orders: By Patch #, by Name, or

by Category.
The Browse page also contains a robust

Compare feature, as well as a sub-menu where

you can designate a Multi or Single patch as a

Favorite. You can stash up to 128 of these in a

Favorites bank for instant access.
For details on each of these functions, see

Using the Browser (p. 92)

Favorites (Shift + Browse)

When you need to find your best sounds

immediately you can jump straight to your

Favorites bank from any other page.

• Hold [SHIFT] and press [BROWSE] to access

your Favorites

• Use the Page Down/Up arrows to move

between the 16 banks of Favorites

• Press the Control button next to the patch

name to select it.

The HOME button

The Home button is located at the bottom of

the Main Systems section. It provides a quick

way to get back to the top level of Single or

Multi mode, where the Macro controls are. This

is known as the Home page in either mode.

All Notes Off

Sometimes MIDI signals are disrupted and

a note becomes stuck. If that happens, hold

[SHIFT] and press [HOME] to transmit an “All

Notes Off” command. This will silence any

stuck notes.

The SAVE button

Whenever you’ve made an edit that you’d hate

to lose, press [SAVE] to access the Save page.

You’ll be able to select a new location for the

edited patch, rename it, and assign it to a

category (Bass, Pad, etc.). You can even decide

which color the Patch knob and wheels will be

when the patch is selected.
There’s another feature that determines

whether the positions of the Macro knobs will

be stored as-is, returned to zero, or saved as

edits to the parameters they control.
For details, see

Save the Patch (p. 94)

System Setup

This section has 13 pages. It holds all of the

global settings for the keyboard, the knobs,

the pedals, the CV / Gate section, etc.
[SAVE] and [SYSTEM SETUP] are used

together to specify the boot-up patch for the

Hydrasynth Deluxe.
For details about each page, see

The System

Setup Pages (p. 96)

Содержание Polytouch HUDRASYNTH Deluxe




















































































































Результаты поиска

Содержание Polytouch HUDRASYNTH Deluxe

Отзывы:

Похожие инструкции для Polytouch HUDRASYNTH Deluxe

Бренды по названию

Популярные бренды

ASM Polytouch HUDRASYNTH Deluxe, Руководство пользователя

Результаты поиска

Содержание Polytouch HUDRASYNTH Deluxe

Отзывы:

Похожие инструкции для Polytouch HUDRASYNTH Deluxe

Бренды по названию

Популярные бренды