Drain Valve Replacement
312361D
23
Drain Valve Replacement
Removal
1.
Relieve pressure, page 7. Disconnect power cord
from outlet.
2.
Using a punch and hammer, tap pin (47) out of drain
handle (46).
3.
Pull drain handle (46) and base (45) off drain valve
(44).
4.
Using a wrench, loosen drain valve (44) and remove
it from manifold (43).
Installation
1.
Thread drain valve (44) into manifold (43) opening.
2.
Hand tighten securely. Using a wrench, torque to
120 to 130 in-lbs.
3.
Turn valve stem so hole for pin (47) is positioned at
12 o’clock (pin can be temporarily inserted to turn
valve stem).
4.
Push base (45) over drain valve (44) and then drain
handle (46) over base (45).
5.
Replace pin (47) in drain handle (46). If necessary,
use a hammer to tap it in place completely.
Before installing new drain valve, be sure old gas-
ket (44a) and seat (44b) are not still inside mani-
fold.
44a
44b
44
45
46
47
ti9155a
43
