PAGE 4
Quick Guide DS 130L / April 2014 © ASL Intercom BV
9.0
POWERING
The DS 130L is powered (48V DC) via the
intercom line (string). Since this unit uses more
power than for instance a DS 290 beltpack it is to
be advised to install a DS 85 booster power
supply on the string, close to the DS 130L’s.
If the DS 130L is connected to one of the outputs
of a DS-88 Hub, additional 48 VDC power may be
supplied by a DS-84 Power Injector, to be placed
in the “Intercom Out” line of the DS-88 Hub.
See also section 10.
10.0
WIRING CONFIGURATIONS
10.1
DS 130L Paging Speakers connected to an intercom line (string):
10.2
DS 130L paging speakers connected to DS 88 outputs, with and without a DS-84 Power Injector:
The DS-84 Power Injector is designed to boost
the 48VDC power of an “Intercom Out” line of a
DS -88 Hub, should the 48 VDC power coming
from that DS-88 not be sufficient. DS-84’s are
usually placed in the 19” rack in which the DS-88
is installed.
11.0
DS 130L TECHNICAL SPECIFICATIONS
Loudspeaker
:
Size: 70 mm /
Impedance: 8 Ω
Max. SPL: 97 dBA @ 1m
Dimensions & Weight
Width: 162 mm / Depth: 154 mm
Height: 40 x 85 mm (sloping)
Weight (including wall mount kit): 1430 gram
Speaker Driver Amp:
Max. Output power: 3 W
@ 8 Ω
DS 130L power consumption
(at max. level): 220 mA
ASL reserves the right to alter specifications
without prior notice
