8
Preparing the Camera Head
Whether you are using the Fuji 2.8mm lens or the Fuji 4mm lens, the
camera head preparation will be the same. The operation has to be done
on the lens itself to adapt it to the BLuFISH lens adaptor. If the threaded
mounting block is attached to the camera head, it will have to be re-
moved, as the camera head will not fi t into the housing with it on.
1.
First, take your accessory lens
(Fuji 2.8mm or 4mm) and securely
screw it on the camera head.
2.
Identify the philips head screw
near the aperture values and
unscrew it from the lens. Keep it
close for use on step 3.
3.
Place the Iris bushing as shown
and secure it into place by screw-
ing the philips head screw back
into place. The bushing should
be steady and solid. Do not over
tighten the screw. This may cause
damage to the lens.
By now, you should have your
camera head all set for the final
assembly. Leave the cover on in
order to protect the lens
Preparing Camera Head
